diff --git a/README.md b/README.md
index 785a146..0d42171 100644
--- a/README.md
+++ b/README.md
@@ -68,16 +68,16 @@ The supported commands can be found in the table below:
 | 8       | n/a                                 | Switch to 80 Character mode if the 40/80 Column display upgrade has been added\.                                                                                                                        |
 | B       | n/a                                 | Enable/Disable key entry beep\.                                                                                                                                                                         |
 | C       | n/a                                 | Initialise memory from 0x1200 \- Top of RAM\.                                                                                                                                                           |
-| D       | <\address>                           | List/Dump memory from <address> in hex and ascii\.                                                                                                                                                      |
+| D       | \<address>                           | List/Dump memory from \<address> in hex and ascii\.                                                                                                                                                      |
 | F       | n/a                                 | Boot from Floppy Disk                                                                                                                                                                                   |
 | I       | n/a                                 | List the files stored in ROM\. Each file title is preceded with a hex number which can be used to identify the file\.                                                                                   |
-| J       | <\address>                           | Jump \(start execution\) at location <\address>\.                                                                                                                                                        |
-| L       | <\name> or <file number>             | Load file into memory from Tape or Rom Filing System\. If a <name> or <file number> is given, the RFS is searched, if no parameter is given then the first program encountered on tape will be loaded\. |
-| l       | <\name> or <\file number>             | Same as above but once the program is loaded it will not be executed\. Control will return to the monitor\.                                                                                             |
-| M       | <\address>                           | Edit and change memory locations starting at <address>\.                                                                                                                                                |
+| J       | \<address>                           | Jump \(start execution\) at location \<address>\.                                                                                                                                                        |
+| L       | \<name> or \<file number>             | Load file into memory from Tape or Rom Filing System\. If a \<name> or \<file number> is given, the RFS is searched, if no parameter is given then the first program encountered on tape will be loaded\. |
+| l       | \<name> or \<file number>             | Same as above but once the program is loaded it will not be executed\. Control will return to the monitor\.                                                                                             |
+| M       | \<address>                           | Edit and change memory locations starting at <address>\.                                                                                                                                                |
 | P       | n/a                                 | Run a connected printer test\.                                                                                                                                                                          |
 | R       | n/a                                 | Run a memory test on the main memory\.                                                                                                                                                                  |
-| S       | <\start addr> < \end addr> <\exec addr> | Save a block of memory to tape\. You will be prompted to enter the filename\.                                                                                                                           |
+| S       | \<start addr> \<end addr> \<exec addr> | Save a block of memory to tape\. You will be prompted to enter the filename\.                                                                                                                           |
 | T       | n/a                                 | Test the 8253 timer\.                                                                                                                                                                                   |
 | V       | n/a                                 | Verify a file just written to tape with the original data stored in memory                                                                                                                              |
 #### To Do